Filter
Top Products
MAINTENANCE
CAUTION
:
Always be sure that the tool
is
switched off and unplugged before attempting to perform
inspection and maintenance.
After use
1
Always remove the sponge from the tool
and wash the sponge in detergent solution.
Dry the sponge thoroughly in
a
breezy
shaded area.
(Note)
0
If
you
do not wash the sponge after each
use, the wax absorbed in the sponge will
dry and the sponge will become heavier,
less
porous and dirty. This could cause
greater vibration of the tool, resulting
poor finish.
I
Never
use
an
electric
washer
to
clean the
sponge.
0
Do not wash the sponge too harshly, or the Velcro sheet on the sponge will come off.
Wipe the tool off with the soft cloth dampened in detergent solution. Never use thinner
or benzine.
Storage
Before storing the tool, remove moisture from the tool and dry the sponge thoroughly.
(Note)
Store the tool with the sponge removed, or the sponge may be deformed.
To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment
should be performed by Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
7