Filter
Top Products
Operation
r
1.
Waxing
Switch on the tool. Move the tool slow-
ly over the work surface with front to
back, side to side movement while apply-
ing light pressure to
the
tool
so
that
wax
will be applied to the work surface thin
and evenly.
Apply
light
pressure
a
Move
slowly
(Note)
*Do
not bear down the tool excessively during operation. Smooth and even waxing
cannot be performed because the bottom of the sponge will not move correctly
as
designed.
*The tool may become hot during operation. This
is
a
normal condition and does not
indicate
a
problem.
I
When resting the tool, use the handy
plastic case provided
so
that mud and/or
sand will not stick to the sponge.
/
Plastic case
Buff the dried wax by rubbing the car body surface with
a
clean, soft and dry cloth.
2.
Removing stubborn dirt and oil film
For removing stubborn dirt from the car body surface and oil film from the windshield,
apply the appropriate polish/cleaner for the application to the sponge and operate the
tool in the same manner
as
waxing.
(Note)
When changing from the use of wax, polish or cleaner, always wash the sponge in
detergent solution before starting the next job.
6