Filter
Top Products
ADDITIONAL SAFETY RULES
1.
Use only
12
volt
DC
power source, or the motor
will
be damaged.
2.
Operate the tool only after removing mud and sand from the car body and
3.
Do
not wet the tool, or the tool
will
be damaged.
4.
Do
not bear down the tool excessively during operation. Smooth and even
operation cannot be performed because the bottom of the sponge
will
not
move correctly as designed.
5.
Do
not place the tool directly on the ground.
Mud
and/or sand may stick to
the sponge and scratch the car body.
6.
Do
not place the tool on the car body, the tool may fall from the car body
and be damaged or cause damage to the car. Use the plastic case as explained
on page
6.
7.
Do
not leave the tool
in
hot places such as a car exposed to direct sunlight
and with the doors and windows closed. This can cause discoloration andlor
damage to the tool enclosures.
8.
Wipe the tool off with a soft cloth dampened
in
detergent solution. Never
use thinner or benzine. This can cause discoloration and cracks
in
the tool
enclosures.
9.
Let the engine of the car idle to maintain the charge
in
the car's battery when
using the tool for a long time.
sponge, or the car body will be scratched by mud and sand.
SAVE THESE INSTRUCTIONS.
4