Filter
Top Products
15.
CHECK DAMAGED PARTS.
Before further use of the tool, a guard or
other part that is damaged should be carefully checked to determine
that
it
will
operate properly and perform its intended function. Check
for alignment of moving parts, binding of moving parts, breakage of
parts, mounting, and any other conditions that may affect its opera-
tion.
A
guard or other part that is damaged should be properly repaired
or replaced
by
an authorized service center unless otherwise indicated
elsewhere
in
this instruction manual. Have defective switches replaced
by authorized service center.
Do
not use tool
if
switch does not turn
it
on
and off.
3