Filter
Top Products
Before installing the sensor, consider the following points:
z Mount the sensor two meters (6-1/2’) high for best coverage.
z Mount the sensor with a 14 degree downward incline angle against the wall for
optimum range.
To install the PIR Motion Sensor, please follow these steps:
z Take out the screws or double sided adhesive and install the mounting bracket
on the wall. Press the ball joint portion into the bracket until it snaps securely.
(Secure the mounting bracket on the wall, 2 meters above the floor).
z Place the PIR sensor on the mounting bracket.
z Test the PIR sensor by walking within its range. When the sensor is triggered,
the red LED light will flash once for 1 second.
Door/Window Detector
The magnetic Door/Window detector is a contact sensor, and should be applied on a
door or window. When the magnetic contact is opened (broken) or the battery is low, the
sensor will send out a message to the main console. A message on the triggered sensor
can be seen on the Main Console’s LCD display.
19