Filter
Top Products
18
AE-2000 Operation
Resident Access with an Entry Code
• Residents have up to 40 seconds to key in their entry code.
• Up to eight seconds are allowed between each keystroke.
• If the code is entered wrong, press the key to reset the
keypad and re-enter the correct entry code. (On remote keypads,
press the key to reset the keypad.)
• If the system is displaying the directory names, press the key
fi rst, before keying in the entry code.
• After a correct code is entered, and if the conditions for granting
access are fulfi lled, the programmed relay will activate for the
programmed time.
• If the number of incorrect codes entered exceeds the keypad
lockout count, the keypad will be locked and not accept any entries
for one minute.
• If the Anti-passback feature is enabled, the entry code will be
unusable until the anti-passback time expires.
Resident Access with a Wireless Transmitter
• Activate a wireless transmitter within radio range of the AE-2000’s
antenna.
• After a valid transmitter is decoded, and if the conditions for
granting access are fulfi lled, the programmed relay channel will
activate for the programmed time.
• If the Anti-passback feature is enabled, the transmitter will become
unusable until the anti-passback time expires.
Visitor Access with a Resident Call
• Press the key below the or arrow repeatedly to
scroll through the resident’s names alphabetically and display their
associated directory number.
• To scroll through the alphabet faster and choose which letter to
view, press and hold down the key below the or
arrow. Release the key when the desired letter is underlined.
• With the resident directory displayed, the visitor enters the
directory number to place a call to the resident.
• If the visitor already knows the resident’s directory number, they
can press the key then enter the directory number without
viewing the directory display.
• The system will dial the resident’s telephone number to establish
2-way communications.
✦ NOTE: The resident’s telephone number will never be displayed to
the visitor.
• If the resident is using the telephone at the same time a visitor
calls, the system will indicate to the visitor that the line is busy.
• The resident answers the call and converses with the visitor to
determine if access will be granted.
• The resident can use their telephone’s keypad to grant access
activating Relay Channel “A” by pressing
,
or activating Relay
Channel “B” by pressing . After access is granted, the system
will disconnect the visitor and resident call.
• The resident can disconnect the visitor without granting access by
pressing
or by hanging up.
✦ NOTE: The telephone keys that the resident presses can be
customized for the installation.
• The length of time the visitor is allowed to talk can be programmed
from 15-255 seconds. The resident will hear a series of beeps
during the last 10 seconds of talk time. To restart the talk timer, the
resident can press
on their telephone.
220231 B IMAGE18
KEY IN AN ENTRY CODE AT THE SYSTEM KEYPAD
OR ENTER A CODE AT A REMOTE KEYPAD
- OR -
IF THE SYSTEM IS DISPLAYING THE DIRECTORY NAMES,
PRESS THE KEY FIRST, BEFORE KEYING IN AN
ENTRY CODE
IF THE CODE IS ENTERED WRONG, PRESS THE
KEY TO RESET THE KEYPAD AND RE-ENTER
THE CORRECT CODE (USE THE KEY TO RESET
REMOTE KEYPADS)
ACTIVATE TRANSMITTER
ANTENNA
VISITOR
RESIDENT
PRESS THE KEY BELOW THE OR REPEATEDLY
TO SCROLL THROUGH THE RESIDENT'S NAMES
- OR -
TO SCROLL THROUGH FASTER, PRESS AND HOLD
THE KEY BELOW OR THEN RELEASE
THE KEY WHEN THE DESIRED LETTER IS UNDERLINED
THE RESIDENT TALKS TO THE VISITOR
AND CAN GRANT OR DENY ACCESS
USING THEIR TELEPHONE KEYS
RELAY "A"
RELAY "B"
DISCONNECT
WITH THE RESIDENT DIRECTORY DISPLAYED,
ENTER THE RESIDENT'S DIRECTORY NUMBER TO
PLACE A TELEPHONE CALL TO THE RESIDENT
IF THE VISITOR ALREADY KNOWS THE RESIDENT'S
DIRECTORY NUMBER, THEY CAN PRESS THE KEY
THEN ENTER THE DIRECTORY NUMBER WITHOUT
VIEWING THE DIRECTORY DISPLAY
PRESSING THE KEY DURING A TELEPHONE CALL
WILL CANCEL THE CALL IN PROGRESS