Lennox International Inc. Ellite Series Thermostat User Manual


 
Page 11
Fan Schedule
The FAN setting can be programmed for ON, AUTO or
CIRC for each period selected:
ON −− Fan runs continuously. Use this setting for improved air
circulation or for more efficient central air cleaning.
AUTO −− Fan runs only when heating or cooling system is on.
CIRC −− Fan runs randomly approximately 35% of the time.
Use this setting for improved air circulation or for more effi-
cient central air cleaning when you do not want the fan to run
continuously.
Fan Status Display on Home Screen −− If the fan program is
scheduled, AUTO is displayed as the fan setting, along with
the particular fan setting that has been programmed. For ex-
ample, if, during the WAKE period, the Fan has been set to
AUTO, then AUTO is shown as the fan setting. However, if,
during the WAKE period, the Fan has been set to ON, both
AUTO and ON are displayed. AUTO indicates that the fan
has been scheduled and ON indicates that the fan has been
scheduled to be ON.
Manually Override Scheduled Fan Setting −− If the fan set-
ting is scheduled, press the FAN key, then press the desired
fan setting to manually override the scheduled fan setting.
Fan operation will return to the programmed operation when
the next schedule period begins.
SCHED HOLD CLOCK SCREEN
THU
AM
FAN
SYSTEM
HEAT
Following
Schedule
Inside
Set To
ON
AUTO