Filter
Top Products
Page 10
Program Your Heating and Cooling Schedule (Cont.)
NOTE − The FAN setting can be programmed for ON, AUTO
or CIRC for each period selected. See following page for
more information about fan setting options.
9 − Press DONE key when finished. Saving changes screen
appears to indicate that schedule changes are being saved to
the days selected.
10 − Repeat steps 1 through 9 to set a program schedule
for the remaining days of the week. Example: If Mon − Fri
was selected first, repeat steps 1 through 9 to program Sat
and Sun.
NOTE − To exit the schedule without saving changes, press
CANCEL key at any time.
MON TUEWEDTHUFRI
SAVING CHANGES