Filter
Top Products
18
18
PROGRAMMING
Option Menu
Your thermostat has many settings that can be adjusted to fit your system and preferences.
■
Press to enter the Option Menu and to change to the next option selection.
■
Press at any time to return to normal mode.
Local temperature sensor weighting
■ or to change weighting between FULL,
HALF or OFF.
Remote temperature sensor 1 weighting
■ or to change weighting between FULL, HALF or
OFF. The factory default is “HALF.” The current temperature measure-
ment from sensor 1 is shown. (Blank if not connected.)
option
ret-clear
option
1
Local
Temp
option
2
Reamote-1
Te mp
41653_model43558.pmd
19
Remote temperature sensor 2 weighting
■
or to change weighting between FULL, HALF or
OFF. The factory default is “HALF.” The current temperature measure-
ment from sensor 2 is shown. (Blank if not corrected.)
NOTE:
Refer to the Remote Sensors section on pages 51-53 for more information on sensor weightings.
Fahrenheit or Celsius (F°/C°) selection
■ or to change the thermostat display between
Fahrenheit and Celsius.
12 Hr or 24 Hr. Clock selection
■ or to change the time format display between
12 hour (AM / PM) and 24 hour (military).
option
3
Remote-2
Te mp
option
4
Temp
option
5
Clock
(continued)