Filter
Top Products
15
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
SYM-40 LOG PLACEMENT
Figure 12
Log
Number Description
1 Rear Log
2 Bottom Left Log
3 Bottom Right Log
4 Top Left Log
5 Top Right Log
6 Top Right Cross Log
7 Front Log
Catalog Number for the entire
log set: H6956
Step 1
Step 3
Align the two holes at the bottom of log (1) over
the two tabs on the burner
1
Placement tabs
for log (2)
Spread Glowing Embers
(Rockwool) As Shown
Placement tabs
for log (3)
7
3
2
1
5
6
4
Step 4
Place log (5) over the pin at the top of
log (6) and rest the tip of the log on the
burner dimple as shown.
5
7
Place log (7) on left side of V-Bracket and rotate
counterclockwise the bottom of the log until it
touches the right side of the bracket.
Place log (4) over the pins on log (2)
as shown.
First place log (6) over the pin on log (3), then
rest the back half of log (6) over the pin on log (1)
4
6
Step 2
Align the slots at the bottom of logs (2) and
(3) over the log tabs on the left and right side
of the burner
2
3
Pins on log (2) used
with log (4) in Step 3.
Pin on log (1) used
with log (6) in Step 3.