Filter
Top Products
Installation Accessories
Description Cat./Part No.
Outside Air Kit (included with fireplace)
Outside air kit, UZI UZI
UZI outside air kit fireplace adaptor, UZIAD UZIAD
Gravity Kit
Gravity Kit, Complete double ducting system including: 2 elbows 90º, 2
telescopic lengths, 2 grill supports and 2 black grills, 7B30ZK-1
7B30ZK-1
Gravity Kit Accessories
Black grill with support, 7B30ZO 7B30ZO
Brass grill (for 7B30ZK-1), 7B30ZGB 7B30ZGB
Elbow 90º, 8” dia., 7B26ZE90 7B26ZE90
Elbow 45º, 8” dia., 7B26ZE45 7B26ZE45
Telescopic length, 8” dia., 7B26ZLA 7B26ZLA
Adjustable length, 8” dia. (2” - 5”), 7B26ZL2A 7B26ZL2A
Radiation shield (for grill), 7B26ZR 7B26ZR
Central Forced Air Kit Accessories
Central Forced Air Kit, Central forced air kit including: blower
(BISZY), flex adaptor (BISAF), 2 clamps, variable speed
control (VRUW), thermo-disk (VTU), fan to flexible pipe
adapter (BISAVF), back draft damper (BISBD), aluminium
tape, BISFWK-1
BISFWK-1
Fireplace to Flex adaptor and 2 clamps, BISAF BISAF
Flexible pipe 5” I.D. x 15 ft. Long, 5FLEX15 5FLEX15
Flexible pipe 5” I.D. x 30 ft. Long, 5FLEX25 5FLEX25
Blower 250 CFM for central forced air kit, BISZY BISZY
Blower variable speed control with decorative wall plate for
(BISZY), VRUW
VRUW
Thermo-disk, on/off blower control (for BISZY), VTU VTU
Blower to flexible pipe adaptor, BISAVF BISAVF
Heating and cooling thermostat, HCTW HCTW
Backdraft damper, BISBD BISBD
Fireplace Blower Kit
Two blower kit with thermostatic control, UZY5 UZY5
OPTIONAL INSTALLATION ACCESSORIES
AC Chimney*
(10” Diameter AC - Air Cooled)
* AC Chimney is NOT recommended at elevations above 4,000 feet or in cold climates
(climates where temperatures will fall below 32° F / 0° C).
Description Cat./Part No.
One of the following adaptors is required
if installing an AC chimney system
Starter Section, 10” Dia., AC10SB H3776
Offset Starter Section 30º, 10” Dia., AC10SB30 H3777
The following outside air kit is required if installing an AC chimney system
Outside air kit (chimney) (flex, insulation, outside register
and coupling), ACZI
H1967
Lengths and Misc. Chimney Components
12” Length, 10” Dia., AC10L12 H3765
18” Length, 10” Dia., AC10L18 H3766
36” Length, 10” Dia., AC10L36 H3767
48” Length, 10” Dia., AC10L48 H3768
15º Elbow, 10” Dia., AC10E15 H3760
30º Elbow, 10” Dia., AC10E30 H3761
Rain Termination Cap (regular), 10” Dia., AC10CPR H3759
Spark Arrester Screen, PE+ H0479
Wall Band, XBM XBM
Supports
Support section (10”), AC10SL H3778
Universal support, AC10SU H3265
Roof Flashings
Flat roof flashing (includes spacer & collar), ACBI7FR H3275
Roof Flashing, Adjustable, 1/12 - 7/12 (5º - 30º) (in-
cludes spacer & collar), ACBI7FAR
H3276
Roof Flashing, Adjustable, 8/12 - 12/12 (30º - 45º)
(includes spacer & collar), ACBI7FBR
H3277
Misc.
Firestop, AC10BF H3758
Radiation Shield, AC10RS H3769
Attic Radiation Shield, ACBI7RSA H3270
Telescopic Attic Radiation Shield, AC10RST H3775
Insulated Wall Radiation Shield 30º, AC10RSMI30 H3272
Insulated wall radiation shield 45º, AC10RSMI45 H3774
Outside air coupler for air kit, UACZI H3274
Storm Collar, AC10FC H3278
CHIMNEY - PARTS AND COMPONENTS LISTS
Fireplace Model Cambria™ - Approved Venting Components manu-
factured by Security Chimneys International only.
• 10” diameter chimney - AC (air cooled), Secure Temp™ ASHT+ (or Nova
Temp™ HT6103+).
Notes:
1. (Projet NovaTemp ) HT6103+ is equivalent to ASHT+
2. AC Chimney is Not recommended at elevations above 4000 feet or in cold
climates where temperatures are likely to fall below 32° F (0° C). When using
AC chimney, an AC10SB (H3776) starter section must be used before installing
an elbow. When an offset is needed immediately off the top of the fireplace, a
starter section H3777 is available.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
23