Filter
Top Products
icomfort Wi−Fit 7−Day Programmable Communicating Thermostat
Page 15
Adjust temperature when program is ONĊProgram HOLD
When the program is ON, the mode button (shown in figure 20, labeled
spring...program is ON) indicates which program is running. In this mode,
change temperature by pressing a set temp button, which produces an up or
down arrow, then use the arrows until the cool to" (or heat to") number is at
the desired temperature (see A in figure 20).
While changing the setting, the other options menu appears (see B in figure
20), giving a list of options you can choose.
You may select one of the hour buttons (1, 2, 8, or 24) if desired. If you select
custom, a time/date appears and you have the option of setting the hold for
any length of time (see C in figure 20).
After a hold is set, the other options menu disappears and a message will
state when the hold expires, along with a cancel option should you choose to
revert back to the program.
Note that if you do not choose one of the other options", the default setting
will be that the program is held until the next period.
indoor temperature
indoor humidity is 41%
fan is
OFF
fan is
AUTO
cool−to
set temp
78
heat to
75
spring...
program
is ON
fan is
AUTO
away
mode
outdoor
temperature
80
use arrows
to change
temperature
touch
cool−to
button
indoor temperature
indoor humidity is 41%
fan is
OFF
9:39 am January 23, 2012
fan is
AUTO
cool−to
set temp
75
heat to
72
program hold until
next program setting
other options include
away
mode
system is cooling
use arrows
to change
temperature
?
1hr 2hr
8hr 24hr
custom
select an option or do
nothing to accept the
default Program d"hold
until next period"
Program hold until
next period
cancel
(other options menu)
SMTWTFS
January 2012
1234567
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31 save
09 : 39 am
program hold
9:39 am January 23, 2012
Wi−Fi
?
9:39 am January 23, 2012
Wi−Fi
?
Figure 20. Adjusting temperature with program running