Filter
Top Products
icomfort Wi−Fit 7−Day Programmable Communicating Thermostat
Page 13
Service Information
Service information is normally filled in by the installer at time of initial instal-
lation. However, you can change this information, when and if needed.
Touch any line of text to produce a keyboard and then enter any new informa-
tion. Touch the save button when finished entering information.
SERVICE INFORMATION
Dealer Name Lennox
Dealer Address 1234 Fifth St
Dealer Phone 1−800−0−LENNOX
Dealer Email dealer@hvac.com
Dealer Website www.lennox.com
Dealer Number ******
System Desc myicomfort system
press any line to edit it
thermostat info
click any line;
keyboard will
pop up to input
information
9:39 am January 23, 2012 ?
Wi−Fi
keyboard tool
System Desc
my icomfort system
Figure 16. Service Information
HELP (?)
When you touch the help icon (?) the screen changes to show an array of
(?)’s located at "active" points on the screen. When you touch a (?) a popup
describes what you can do by pressing the active button(s) nearest it. Figure
17 shows an example of the screen and a popup.
indoor temperature
indoor humidity is 41%
fan is
OFF
fan is
AUTO
cool−to
set temp
75
heat−to
70
heat
or
cool
fan is
AUTO
away
mode
outdoor
temperature
80
system is cooling
9:39 am January 23, 2012Wi−Fi
?
Change the system function to either heat
or cool (auto), heat only or cool only mode
or turn on one of the Programs. You can
also select ’edit’ to enter the edit program
screen.
Figure 17. Typical Help (?) screen