Filter
Top Products
25
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Opening and Removing Door
If the glass in your door is damaged or broken - the com-
plete door assembly must be replaced using part #45715.
CAUTION: Do not attempt to open the main door while
the unit is burning or still hot. Let the unit cool before
opening the door.
To replace the door:
1. Shut off the main burner using the rocker switch.
2. Shut off the pilot flame by turning the pilot knob clock
-
wise to “OFF.”
3. Facing the stove pull open the left side door and open the
right side door by removing the socket head cap screw
located underneath the door near the front of the stove.
4. With both doors open, remove the four socket head cap
screws, two on each side, securing the top. Lift and remove
the top of the stove.
5. Unlatch main door and lift straight up off of the locating
hinge pins.
6. Reinstall door assembly following steps in reverse or
-
der.
Figure 35