Filter
Top Products
8
IV. Function Key Layout
A. The below picture shows the eight function keys used in programming
and operation of your indoor weather station
V. Program Mode
The program mode is laid out in a manner that allows you to program each
function separately, or you can follow the instructions entirely to program the
indoor weather center. Complete programming is usually done for the initial
set-up, and will require you to skip step 1 and 2 of each programming section.
The programming mode can be exited at any time by either pressing the “CH”
button, or waiting for the 16-second time-out to take effect.
A. Overview of programming mode sequence
Note:
If the country setting is other than USA step 8 is city, step 9 is time
zone, etc.
1. Hour 2. Minute 3. 12/24 hour 4. Year
5. Month 6. Date 7. Country 8. State
9. City 10. Time Zone 11. DST on/off
12. °F/°C
13. inHg/hPa 14. Relative
pressure setting
15. Forecast
sensitivity
16. Storm
warning setting
17. Storm
alarm on/off
18. LCD
contrast
19. LI on/off