Filter
Top Products
18
m. Press and release the “SET” key to advance to the month
setting.
n. The month is now flashing (the current month).
o. Press and release the “+” or “–“ key to select the month
desired.
p. Press and release the “SET” key to advance to the date setting.
q. The date is now flashing (the current date).
r. Press and release the “+” or “–“ key to select the date
desired.
s. Press and release the “SUN/MOON” key to calculate the new
city location at the date selected.
You may instead press the “SET” key to select a different location,
starting at step b above.
t. Once the “SUN/MOON” key is pressed, the sunrise/set and
moonrise/set times will flash as dashes while the indoor
weather station calculates the times (the moon phase is
calculated, also). Once the times are displayed, the indoor
weather station will remain in this mode for 30 seconds or
until the “CH” key is pressed. The year, month, or date will
also be flashing. At this time it is possible to start at step b. to
select another date or location.
u. Once this mode is exited either through timeout after 30
seconds or by pressing the “CH” button, the indoor weather
station will revert to the normal mode with the location and
date set through the programming mode. The indoor weather
station will default to the last city selected when this mode is
entered again.