Filter
Top Products
8
ᕥ Wind about 10 cm of thread away
from the bobbin and feed this into
the bobbin case.
ᕦ Pull the loose end of the thread
through the gap in the side of the
bobbin case
ᕧ under the tension spring
ᕨ until the thread passes out of the slit
in the bobbin case.
´
ᕦ
ᕨ
ᕧ
IB_Sewingmachine_content_UK.qxd 22.07.2004 12:21 Uhr Seite 8