Filter
Top Products
20
i) Blind hem
ᕡ Fold the material as shown. Make
the fold as wide as you want the fin-
ished seam to be: the bottom fold
should be about 5 mm away.
ᕢ Use the blind hem foot. While
sewing, check the seam width and
needle setting, to ensure that the
seam remains uniform.
ᕣ Sew the blind seam on the underside
of the material, so that only the peak
of the zigzag stitch pierces the out-
side of the material. When you have
finished sewing, push the left of the
material over to the right and smooth
out. The seam is almost invisible!
The table below shows the suggested
settings for the various values, depend-
ing on the material used.
ᕡ
ᕢ
ᕣ
IB_Sewingmachine_content_UK.qxd 22.07.2004 12:21 Uhr Seite 20