Filter
Top Products
- 8 -
SERVICING THE PALARRE TOILET SEAT
1. Insert the seat hinge bolts through the holes in the toilet
bowl ledge and secure with two wing nuts as shown in
Fig. #20.
Assembling the Palarre Seat
Fig. #20
Seat Hinge
Bolts
Toilet
Toilet Seat
Wing Nuts
2. Refer to Fig. #21. Hold the cover at approximately a 45
degree angle and align the keyhole slot in the seat
cover with the key in the seat hinge mounting posts.
Slide the posts all the way through the mounting holes.
The seat should move up and down freely.
Assembling the Palarre Seat Cover
Fig. #21
Keyhole Slot
Seat Cover
Seat HInge
Mounting
Posts
Toilet Seat
3. For old style tank lids, install tank lid retainer clips to the
tank lid as shown in Fig. #22.
Tank Retainer Clip Assembly (old style)
Fig. #22
Retainer Clips
Tank Lid
4. Refer to Fig. #23. Install the tank lid assembly to the
toilet while depressing the tank lid retainer clips.
Installing the Palarre Tank Cover (old style)
Fig. #23
Depress
Clips
Tank Lid