Filter
Top Products
6.Take out the orifice support, and then use a 6 mm socket
and wrench or 6 mm nut driver to remove the LP orifice at
the end of the supply pipe. Replace with Natural gas
orifice.
Change the Sear burner orifices
1.Remove the screw securing the igniter and the 2 searing
side burner screws.
2.Lift the searing side burner out of the grill.
IMPORTANT: Check that the orifice is properly installed
inside of supply pipe.
7. Reinstall the orifice support and supply pipe and tighten the
nut with a 24 mm wrench.
8. Reinstall the spider guard, access cover, and wind baffle.
4.Use 6 mm socket wrench or 6 mm nut driver to remove
the orifice. Replace with the Natural gas orifice.
3.Locate the LP gas orifice to the end of the valve.
7