Filter
Top Products
Tools and Parts for Gas Conversion
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Phillips screwdriver
Pipe wrench
Adjustable wrench
6 mm socket and wrench or
6 mm nut driver
Thin flat-blade screwdriver
Pliers
Pipe thread sealant certified
for LP gas
IMPORTANT:
Gas conversions must be done by a qualified
installer. Before proceeding with conversion, shut off the
gas supply to the appliance prior to disconnecting the
electrical power.
If there are damaged or missing parts when you unpack
this kit, call 1-877-373-2301. DO NOT have your
QUALIFIED GAS TECHNICIAN attempt to install this kit
until you receive replacement for any damaged or
missing parts.
Parts needed
Natural gas orifices (supplied with grill)
Note: This manual covers several different models. The grill
you have purchased may have some or all of the features
listed. The locations and appearances of the features shown
here may not match those of your model. Please refer to
your grill’s manual for specific instructions or contact
customer service for information at 1-877-373-2301.
10 ft (3.0 m) Natural gas hose with quick connector
5.9" (150 mm) Natural gas regulator hose
6 mm nut driver
6 mm wrench
Hex Key
Parts supplied
Natural gas regulator 4" W.C. (marked “Natural Gas
Regulator)
4