Kenwood TK-7180 Home Security System User Manual


 
17
RECEIVING
The icon will flash and a calling ID or text message will appear when a
Status call is received.
Press any key to return to Normal Operation Mode.
REVIEWING MESSAGES IN THE STACK MEMORY
1 Press and hold the key programmed as Selcall, Status, or Selcall +
Status for 1 second to enter Stack Mode.
The last received message is displayed with the message number.
2 Press the <B and C> keys to select the desired message.
If programmed by your dealer, you can also use the and keys.
Press and hold the S key to toggle between the message/ call ID, the channel
name, and the time of the received message.
3 Press the S key to return to Normal Operation Mode.
•To delete the selected message, press the A or DTMF # key. To confirm the
deletion, press the S or DTMF
key.
•To delete all messages, press and hold the A or DTMF # key for 1 second. To
confirm the deletion, press the S or DTMF
key.
SHORT MESSAGES
To send a short message, you must connect the transceiver to a PC. Ask your
dealer for details.
Short messages can contain a maximum of 48 characters.
Received short messages are displayed the same as Status messages and are stored
in the same stack memory. A combined maximum of 15 Status calls and short
messages can be stored in the stack memory.
LONG MESSAGES
To send and receive long messages, you must connect the transceiver to a PC.
Ask your dealer for details.
Long messages can contain a maximum of 4096 characters.
GPS REPORT
To send your location data, you must first install a GPS unit (NMEA-0183 format)
onto the transceiver. Press the key programmed as Send the GPS data to
transmit your location data. Ask your dealer for details.