Filter
Top Products
9
SELECTING A ZONE AND CHANNEL/ GROUP ID
Select the desired zone using the keys programmed as Zone Up and Zone
Down.
• The default setting for the key is Zone Up.
• The default setting for the
key is Zone Down.
Select the desired channel or group ID using the keys programmed as CH/GID
Up and CH/GID Down.
• The default setting for the <B key is CH/GID Down.
• The default setting for the C> key is CH/GID Up.
Names can be programmed for zones and channels/ group IDs with up to 12
characters each. However, to fit on the display, names will be abbreviated. Your
dealer can set the zone name to a length of 0 to 12 digits. Channel/ group ID
names will shorten appropriately, to fit in the 12-digit display.
For example, if your dealer sets the zone name to 3 digits, the zone name is
“KENWOOD” and the channel/ group ID name is “–CHANNEL1–”, the following
message appeares on the display.