Filter
Top Products
14
SCAN REVERT
You can select Revert zones and channels/ group IDs using the Zone and
CH/GID keys.
Eight types of Scan Reverts which can be programmed by your dealer are
available.
• Last Called Revert: The last zone/ group ID received is assigned as the new revert
zone and group ID.
• Last Used Revert: The last zone/ group ID responded to is assigned as the new
revert zone and group ID.
• Selected: The last zone/ group ID selected is assigned as the new revert zone and
group ID.
• Selected + Talkback: If the zone/ group ID has been changed during Scan, the newly
selected zone/ group ID is assigned as the new revert zone and group ID. The
transceiver “talks back” on the current receive group ID.
• Priority 1/ Priority 2: If your dealer has programmed a Priority channel (either
Priority 1 or Priority 2), this channel is the revert zone and channel.
• Priority 1 + Talkback/ Priority2 + Talkback: If your dealer has programmed a
Priority channel (either Priority 1 or Priority 2), this channel is the revert zone and
channel. The transceiver “talks back” on the current receive channel.
Note: “Priority” and “Priority + Talkback” are not available for Trunking Systems.
PRIORITY SCAN
A Priority channel must be programmed in order for Priority Scan to function.
The transceiver will automatically change to the Priority channel when a signal is
received on it, even if a signal is being received on a normal channel.
• The indicator represents the Priority 1 channel.
• The
indicator represents the Priority 2 channel.
• The
indicator represents both the Priority 1 and Priority 2 channel.
Note: Priority cannot be programmed onto the group ID of a Trunking zone; it can be used only on
channels of Conventional zones.
GROUP SCAN
Group Scan is useful when more than one channel/ group ID is programmed in a
zone. Group Scan is set by your dealer on request. It scans the revert groups
as well as groups that are allowed to be scanned.
When a call is received, the group indicator shows the channel/ group ID, and
that group becomes the revert group. Simply press the PTT switch to respond to
the call.