Filter
Top Products
Ii;ii;ii;ii:_i; i;iit SECTION 4 [ ;ii:_i;i;ii:_i;i;] KNOW ABOUT YOUR WATER SOFTENER
A. DIMENSIONS / SPECIFICATIONS
4O
Pressure Drop (PSI) vs.
Flow Rate (GPM)
35
30
ca 25
8.
O.
2
o 20
._ 15
10
2 gpm
15 ps_
i
2 3 4 5 6 7 8 9 10 11 12 13 14 15
Flow Rate (GPM)
i
16
OTHER SPECIFICATIONS
Type of ion exchange material (resin) -- high capacity
Amount of resin (cu ft) 0.87
Regeneration (recharge) cycle times (minutes)
Fill 3 - 9.48
Brining / brine rinse 91 - 100
Backwash 7
Fast rinse 3
Total regeneration time _ .......... 108 - 118
Efficiency Rating (gr/Ib at 2.6 ib salt
dose) 5060
gpm = gallons per minute
psi = pounds per square inch
gpg = grains per gallon
ppm = parts per million
dp Does not include CLEAN feature cycle times if set to
ON.
This system conforms to ANSI/NSF 44 for the specific
performance claims as verified and substantiated by test
data.
The efficiency rating is only valid at the stated salt dosage.
These softeners were efficiency rated according to ANSI/
NSF Standard 44.
4-2