Filter
Top Products
[i;ii;ii;ii:_i;i;iit SECTION 4 1 ;ii:_i;i;ii:_i;i;] KNOW ABOUT YOUR WATER SOFTENER
S
C
T
N
,JJJJJJJJJJJJJJJJ.
,JJJJJJJJJJJJJJJJ.
'JJJ_JJJJJJJJ-
,JJ JJJJJJJJJ.
,JJJJJ JJJJJJJJJ.
,JJJJJJJJJJJJJJJJ.
,JJJJJJJJJJJJJJJJ.
A. DIMENSIONS / SPECIFICATIONS
A
B
C
D
E
F1
F2
A
\ /
C
J
E
D
'r p
CM
Salt Tank Height 40-1/4 102.2
Resin Tank Diameter 9 22.7
(nominal)
Resin Tank Height 40 101.6
(nominal)
Inlet-Outlet Height 41-1/2 105.4
Overall Height 47-3/4 121.3
Length 19-1/2 49.5
Width 16-1/2 41.9
Distance between inlet- 3-3/8 8.6
outlet center lines
BYPASS VALVES
Bypass valve(s) should always remain in soft
water service position. Position in "bypass" only
if needed for softener repairs.
SINGLE BYPASS
PULL STEM
OUTWARD
FOR
SERVICE
Push
Inward
For
Bypass
3 - VALVE BYPASS
FOR SERVICE
close bypass valve
open inlet & outlet valves Outlet
Valve
FOR BYPASS
open bypass valve
close inlet & outlet valve___./_'_ _
Bypass
_, / Valve
(_ Inlet
Valve
MODEL NOS. 625.388200 & 625.388250 TIMER SR CODE SR27
Note: Please see the rating decal for operating capacity, salt usage and service flow rate/pressure loss
performance spedfications. Performance specifications are validated by the Water Quality Association
(WQA). The rating decal is located on the rim, under the salt hole cover (see page A, inside front cover).
WATER SUPPLY TO WATER SOFTENER
Minimum water system flow (gpm) ..... 3
Minimum-Max. water pressure (psi) .... 20 - 125
Minimum-Max. water temperature (° F) - 40 - 120
Maximum water hardness (gpg) ....... 100
Maximum "clear water" iron (ppm) .... 6
SALT FOR WATER SOFTENER
Type of salt needed
Alternate type of salt
Salt storage capacity (Ibs)
nugget or pellet
pure, evaporated,
compacted water
softener salt
200
4-1