Filter
Top Products
Model No. 625.383500
Model Code 350
12,600 @ 2.5 Ibs.
Rated Softening Capacity (Grains @ Salt Dose) 26,900 @ Z9 Ibs.
32,100 @ 13.3 Ibs.
Rated Efficiency (Grains/Pound of Salt @ Minimum Salt Dose) 5,090 @ 2.5 Ibs.
Rated Service Flow Rate 8.0 gpm
Amount of High Capacity Ion Exchange Resin 0.83 cu. ft.
Pressure Drop at Rated Service Flow 10 psig
Water Supply Max. Hardness 90 gpg
Water Supply Max. Clear Water Iron 11ppm*
Water Pressure Limits (minimum / maximum) 20 - 125 psi
Water Temperature Limits (minimum / maximum) 40 - 120 °F
Minimum Water Supply Flow Rate 3 gpm
Intermittent Flow @ 15 psi 10 gpm**
Maximum Drain Flow Rate 2.0 gpm
*Capacity to reduce clear water iron is substantiated by WQA test data. State of Wisconsin
requires additional treatment if water supply contains clear water iron exceeding 5 ppm.
**Intermittent flow rate does not represent the maximum service flow rate used for detemi-
ning the softener's rated capacity and efficiency. Continuous operation at flow rates
greater than the service flow rate may affect capacity and efficiency performance.
These systems conform to NSF/ANSI 44 for the specific performance claims as verified and
substantiated by test data.
The efficiency rating is only valid at the stated salt dose. These softeners were efficiency
rated according to NSF/ANSI Standard 44.
Variable Salt Dose: The salt dose is selected by the electronic controls at regeneration time
based on the amount needed.
16-1/2" _
3-3/8"
40-1/4"
IN - OUT
47-3/4"
41-1/2"
I
FRONT VIEW SIDE VIEW Figure 1
Questions? Call the Kenmore Water Line 1-800-426-9345 or visit www.kenmorewater.com
4