Kenmore 625.348460 Water System User Manual


 
WATER SOFTENER START-UP
SECTION 1
5
1B. CHECK LIST OF ALL STEP-BY-STEP GUIDES TO INSTALL
Refer to the Installation Manual, part no. 7141417,
for stepĆbyĆstep guides.
To be sure you have done all the steps to install the
softener, read the following list. Page numbers
referred to are in the Installation Manual.
Is the house water flow going INTO the softenĆ
er valve INLET? Trace piping to be sure. See
pages 10 and 11.
Is the plumbing bypass valve (or 3 valves) set
for SERVICE? See page 18.
Is the valve drain hose connected the right
way, and without sharp bends or kinks that
could stop or reduce water flow? See page 16.
Is the softener power cable connected to the
transformerand is the transformer plugged
into an inside,120VĆ60Hz electrical outlet. See
page 20.
Be sure to restart the water heater. See page 20.
BRASS BYPASS
VALVE
PLASTIC BYPASS
VALVE
3 – VALVE
BYPASS
WATER
HEATER