Filter
Top Products
SECTION 4 OT.ERT.INQSTOKNOW
I
4A.
I
DIMENSIONS/SPECIFICATIONS
BYPASS VALVES
SINGLE-PLASTIC
PULL STEM
OUTWARD
FOR
SERVICE
Push
SINGLE-BRASS
9-VALVE
Bypass
ValVe
Inlet
Valve
/--)
I __ I
\
I
:..-8-.J'
\
TIE
D
C
A SaltTankHeight 21-3/4 55.2
B ResinTank Diameter(nominal) 10 25.4
C ResinTank Height(nominal) 21 53.3
D Inlet-OutletHeight 22-1/2 57.2
E OverallHeight 27-1/2 69.9
F1 Length 19-1/2 49.5
F2 Wio'th 16-1/2 41.9
-- Distancebetweeninlet-outlet 3-3/8 8.6
center lines
MODEL NO. 625.348460 TIMER SC CODE SC21
NOTE:
Please see the ratingdecal forwater softener operating capacity,salt usage and serviceflow rate/preP
sure loss performance specifications. Performance specifications are validated by the Water Quality
Association (WQA). The rating decal is located on the rim, under the salt hole cover (see page 28).
WATER SUPPLY TO WATER SOFTENER
MINIMUM WATER SYSTEM FLOW (gpm) 3
MINIMUM-MAXIMUM WATERPRESSURE (psi') 20-120
MAXIMUM WATERTEMPERATURE (°F) 120
MAXIMUM WATER HARDNEss (gpg) 70"
MAXMUM "CLEARWATER" IRON (ppm) 10
SALT FOR WATER SOFTENER
TYPEOFSALTNEEDED Nugget/Peaet
ALTERNATETYPEOFSALT Pure,evaporated,compacted
watersoftenersalt
STOI_AGECAPACITY(pounds) 125
OTHERS
TYPE OF ION EXCHANGE MATERIAL(resin) HighCapacity
AMOUNT OF RESIN (cu.ft.) .60
REGENERATION (RECHARGE) CYCLE TIME (rain.)
FILL 1- 5
BRINING/BRINE RINSE 28
BACKWASH 1
FAST RINSE 1
TOTALREGENERATION TIME 31 - 35
gpm,, gallonsperminute
geg. grainspargallon
psi. paundsI_ squareinch
ppm= padsparmiUion
"Do not excmeclthis numberwhen setling hardness in step2,
page7. The maximumseffingavailableis 95.
18