Filter
Top Products
CONTROL PANEL
REMOTE CONTROL SIGNAL RECEIVER
[,.. ..............................................
ITIMER
- SHUT-OFF TIME
• You will usually use shut-off time while you sleep
• Ifunit is running,Usetimer toset numberof hours untilshut-off
•,Everytime you pushTimer button,it advancesthe Timer
settingasfollows: 1 Hour• 3 Hours• 6 Hours• 10Hours
maximum.
- STARTTIME
• Ifunitisoff,Usetimertosetnumberofhoursbeforeunitstarts.
TEMPERATURE SETTING
• Use these buttons to automatically control the
temperature of the room. The temperature
can be set to one of a temperature between
64°F to 82°F.
• Push the TEMP up or down buttons to shift
the temperature setting from
82°F• 76°F•70°F •64°F
---_- POWER
•To turnthe air conditioner ON,pushthis button.
Toturn the air conditionerOFF, push
the button again.
•This buttontakes priority overany other button.
•When youfirst turn it on, theair conditioner is on
the High coolmode andthe Temp. at70°F.
AUTO RESTART
• In the event of a power failure,
the unit will run at the previous.
• Everytime you pushTimerbutton, it advancesthe Timersettingas follows:1 Hour• 3 Hours• 6 Hours•10 Hours
maximum.
MODE
• Push this button to shift the mode of operation from COOL-HI • COOL-LOW • FAN ONLY-HI • FAN ONLY-
LOW.
HORIZONTAL AIR DIRECTION CONTROL
The horizontalair directionisadjustedby movingthe vertical
louversrightand leftwith yourfingertips.(FIG. 15)
VERTICAL AIR DIRECTION CONTROL
The verticalair directionisadjusted bymovingthehorizontal
louversupand downwith yourfingertips.(FIG.16)
)
FIG. 15
-10-