Filter
Top Products
DISPLAY
V TEMP A "---
ENERGYSAVER
O
I FAN 0
MODE
COOL 0
TIMER
ON/OFF
FAN
SPEED
HI/LO
REMOTE CONTROL SIGNAL RECEIVER
TEMPERATURE SETTING
• Use this button to automatically control the temperature
of the room. The temperature can be set within a range of
60°F to 86°F by increments of I°F.
ENERGY SAVER
, Thefanstopswhen thecompressorstopscooling.
Approximatelyevery3 minutesthefanwillturn on and
checkthe roomair to determineif coolingis needed.
DISPLAY COOL/FAN
•Everytime you push this button, it will toggle between
COOL and FAN.
ON/OFF TIMER
SHUT-OFF TIME
• You willusuallyuseshut-offtime whileyousleep.
• If unit is running, Timer sets number of hours until shut-off.
• For your sleeping comfort, once Timer is set, the Temperature
setting will raise 2°F after 30 min., and once again after another
30 min.
• Every time you push Timer button, it advances the Timer setting
as follows: 1 Hour _,2 Hours _,etc. _ 12 Hoursmaximum.
START TIME
• If unit isoff, Timer sets number of hours before unit starts.
• Every time you push Timer button, it advances the Timer setting
as follows: 1 Hour _,2 Hours _,etc. _,12 Hours maximum.
POWER
• To turn the air conditioner ON, push the button. To turn the air
conditioner OFF, push the button again.
• This button takes priority over any other button.
• When you first turn it on, the unit is in cool mode, High fan
speed, Temperature setting at 72°F.
FAN SPEED
•Everytime you push this button, it advances the setting as
follows: {High(F2) _,Low(F1) _,High(F2)}
• __ _-lltfoJ_J_1:f;i__--
In failure of electric power, the unit runs as previous setting operation.
-10-