Filter
Top Products
SECTION 1 WATER SOFTENER START UP
C. PROGRAM THE TIMER
signal light adjust
salt level adjust display
@
/
/
tank light
Ill ml
Customer Assistance
1-800-426-9345
KenmoreWater.com
©
RECHARGE button
UP
button
,@
\
SELECT
buttons
,/
DOWN
button
When the transformer is plugged in, the model code
HF36, and a test number (example: J1.0) show in the
face plate display for 4 seconds. Then, 12:00 AM and
PRESENT TIME begin to flash.
play reaches 1 using the DOWN button, or the high-
est hardness setting using the UP button.
_SET PRESENT TIME OF DAY
_T2_;" j q,l-rN A,_
- T- - I I_-'I_ILI
7
6 PRESENT TIME
5
2
1
Notes:
If .... shows in the display, press the UP A or
DOWN V button until HF36 shows. Then, press the
SELECT 1 button to set, and change to the flashing
PRESENT TIME display.
To check the model code, unplug the transformer at
the wall outlet and plug in again, if other than HF36
shows, see page 5-3 to reset.
SOUND "BEEPER": A "beeper" sounds while
pressing buttons for timer set-up. One beep signals
a change in the face plate display. Repeated beeps
mean the timer will not accept a change from the
button you have pressed, telling you to use another
button. For example, while setting the hardness
(step 2), the beeper sounds repeatedly when the dis-
If the words PRESENT TIME do not show in the dis-
play, press the SELECT 1 button (FIG. 2) until they
do, or see the previous notes.
• Press the UP / DOWN buttons to set the present
time. Press UP to move the display ahead; press
DOWN to move the time backward.
If the present time is between
noon and midnight, be sure PM
shows.
If the present time is between
midnight and noon, be sure AM
shows.
_LTS_GN_
..... U ,1-11-1p.
-8- PI_II_I
7
6 PRESENT TIME
5
2
1
- -8- - ILI'-IO
6 PRESENT TIME
5
2
1
Each press of the UP /DOWN buttons changes
the time by 1 minute. Holding the buttons in
changes the time rapidly.
1-3
Problems, Questions? Call 1- 800- 426- 9345 Kenmore Water Line