Filter
Top Products
[i!i !!_;_ !! _;_ SECTION 4 KNOW ABOUT YOUR WATER SOFTENER
A. DIMENSIONS / SPECIFICATIONS
S
E
C
T
N
,JJJJJJJJJJJJJJJJ.
,JJJJJJJJJJJJJJJJ.
,JJJJ JJJJJ_JJJ.
'JJJ_JJJJJJJJ-
,JJ JJJJJJJJJ.
,JJJJJ JJJJJJJJJ.
,JJJJJJJJJJJJJJJJ.
,JJJJJJJJJJJJJJJJ.
A
A
B
C
D
E
F1
F2
E
D
C
,1
/I ,!
CM
Salt Tank Height 40-1/4 102.2
Resin Tank Diameter 10 25.4
(nominal)
Resin Tank Height 40 101.6
(nominal)
Inlet-Outlet Height 41-1/2 105.4
Overall Height 47-3/4 121.3
Length 19-3/4 50.2
Width 16-1/2 41.9
Distance between inlet- 3-7/8 9.8
outlet center lines
MODEL NOS. ULTRASOFT 425 & ULTRASOFT 480
BYPASS VALVES
Bypass valve(s) should always remain in soft
water service position. Position in "bypass" only
if needed for softener repairs.
SINGLE BYPASS
PULL OUT
for service
PUSH IN
for bypass
3 - VALVE BYPASS
FOR SERVICE
close bypass valve
open inlet & outlet valves
FOR BYPASS
open bypass valve
close inlet & outlet valves
Outlet
Valve
Bypass
Valve
Inlet
Valve
TIMER HF CODE HF36
WATER SUPPLY TO WATER SOFTENER
Minimum water system flow (gpm) 3
Minimum-Max. water pressure (psi) 20 - t 25
Minimum-Max. water temperature (°F) 40 - t 20
Maximum water hardness (gpg) 110
Maximum "clear water" iron (ppm) * 11
SALT FOR WATER SOFTENER
Type of salt needed nugget or pellet
Alternate type of salt pure, evaporated, com-
pacted water softener salt
gpm = gallons per minute gpg = grains per gallon
psi = pounds per square inch ppm = parts per million
* Capacity to remove clear water iron is substantiated by WQA test data. State of Wisconsin requires
additional treatment if water supply contains greater than 5 ppm clear water iron.
4-1
Problems, Questions? Call 1- 800- 426- 9345 Kenmore Water Line