Filter
Top Products
SECTION 2. PREPARE THE MACHINE FOR SEWING
• Setting Spool Pins
f
t
Spool "
The spool pins are used for holding the spool
of thread in order to feed thread to the
machine.
To use, pull up the spool pins. Push down
for storage.
• Adjust the Presser Foot Lever
Normal up
position
positior
High
position
ip
position
Presser foo'_
lever
J
The Presser Foot Lever raises and lowers your
presser foot.
You can raise it about 1/4" higher than the normal
up position for easy removal of the presser foot or
to help you place heavy fabrics under the presser
foot.
• Thread Cutter
You don't need a pair of scissors to cut the
thread after you finish sewing. Just use the
handy thread cutter.
Pull the threads to lengthen several inches
before starting the next seam.