Filter
Top Products
Prepare the Bobbin
• To Remove the Bobbin Casefrom the Machine
Remove the extension table from
the machine by pulling it to the
left. Open the shuttle cover by
pulling down the embossed part on
the left side of the cover.
Raise needle to its highest position
by rotating hand wheel toward you.
J
To remove bobbin case from shut-
tle, pull open latch of bobbin case.
Pull bobbin case straight out of
shuttle.
• Wind the Bobbin
SECTION 2. PREPARE THE MACHINE FOR SEWING
Release clutch by turning the
clutch knob inside the hand wheel
toward you to stop the needle from
moving while you wind the
bobbin.
i•!