Filter
Top Products
SECTION 3. LEARN THE STITCHES
• Fagoting Stitch
Stitch
Selector release
I
Stitch selector
Stitch length
control 0.5 .to 2
Set the Machine
Top thread tension Zigzag foot
control 3 to 8
NOTE: Be sure to slide back the
selector release to the "SEW"
position.
The Stitch and Its Uses
Use this stitch to join two pieces of
fabric to create an open work
appearance and add design interest.
Here's How
1. Fold under each fabric edge 5/8"
and press.
2. Pin the two edges to paper or tear-
away backing 1/8" apart.
3. Sew slowly, guiding the fabric so
the needle catches the folded
edge on each side.
Decorate with Geometric Patterns
Set the Machine
Stitch
Selector release
!
Stitch selector
F,G,H or I
Stitch length
control
green zone
Top thread tension Satin stitch foot
control 1 to 4
NOTE: Be sure to slide back the
selector release to the "SEW"
position.
The Stitches and Their Uses
These stitches are purely decorative.
You can sew one row or several or
vary the stitch width and length for
special effects.
Experiment on a scrap of fabric to see
what special effects are possible.
Here's How
1. Adjust the stitch width and length
as you desire.
2. Practice the stitch on a scrap of
fabric.
3. Mark the line for decoration on
the fabric, using a washable fabric
marker,
4. Lower the needle at the starting
point.
5. Lower the presser foot.
6. Gently guide the fabric along the
maked line.
31