Filter
Top Products
82
ypoc
1
8
76
54
3
2
5
3
4
1
54
3
2
•To sew
If the diameter of the button is more than 1.0˝ (2.5 cm), a
buttonhole must be made manually as follows:
Turn the handwheel toward you to raise the needle to
its highest position. Raise the presser foot.
Set the stitch at “ ” by turning the stitch selector.
Attach the buttonhole foot [B].
1
5
4
3
2
Manual Buttonhole (Option)
Stitch selector: (BH)
Stitch width: 3 to 5
Stitch length: 0.25 to 1.0
Needle thread tension: 2 to 6
Presser foot B: Buttonhole foot
1
3
2
6
Sew the front bartack and left row, then stop.
Click the buttonhole lever toward you.
8
Sew the back bartack and right row, then stop the
machine at the starting point.
To cut the opening and to reset for sewing the next
buttonhole, refer to instructions and on
page 80.
Pull the buttonhole lever downward as far as it will go.
Lower the needle into the garment where the buttonhole
is to start, and lower the foot.
5
4
7
4
5