Filter
Top Products
SECTION VI.CARE OF YOUR MACHINE
NOTE:
Unplug the machine
Do not dismantle the machine other than as
explained in this section
Do not store the machine in a high-humidity area,
near a heat radiator or in direct sunlight
Clean the outside of the machine with a soft cloth
and mild soap
Replacing the Light Bulb
CAUTION:
As the light bulb could be HOT, protect your
fingers when you handle iL
Unplug the machine and open the face cover. While
pushing the bulb up, turn it counterclockwise to remove.
Put in a new bulb by pushing it up and turning it clockwise
I !
'11
t
! I
'1:
1
Cleaning the Feed Dogs
Unplug the machine, and remove the presser foot and
needle Open the face cover to allow room to remove the
needle plate screw with a screwdriver_
f-
Use a lint brush to clean the feed dogs,
Replace the needle plate and tighten it with a screwdriver.
J
h
J
58