Kenmore 1!6O31040 Vacuum Cleaner User Manual


 
ATTACHMENTASSEMBLY
HOSE AND WAND
1. Insert the tab on Hose "_ \
the telescopic wand Hendle_" --1
into the "J" slot on
the hose handler "J'" SIoI_....__-."_
Twist the telescopic
wand to lock in
place. '_=,
2. Place the telescop- _1
ic wand in the wand Telescopic
hose as shown,
Hose
Holder
3o Snap the
hose handle
into the hose
holder located
on the handle
of the vacuum
cleanen
NOTE: Be sure
the raised edge
of the hose
handle rests
against edge of
the hose holder,
4. Rotate the
hose release
lever down
and route the
hose as
shown.
5oSnap the
hose into the
hose cuff on
the side of
the vacuum
cleaner
Hose
Telescop_
Wand
Hose
Re_ase_
6_Rotate the hose
Hose release lever
Release upwards to lock
the hosein place_
CAUTION . ]
Do not operale the agitator without thel
wand properly lnserled Into the wandl
holder and the hose handle properlyl
secured In the hose holder I
I