Kenmore 1!6O31040 Vacuum Cleaner User Manual


 
MOTOR PROTECTION SYSTEM
Thermal Protector - Suction Motor
This vacuum cleaner has a thermal
protector which automatically trips to
protect the vacuum cleaner suction motor_
If a clog prevents the normal flow of air
to the motor, the thermal protector turns
the motor off automatically° This allows
the motor to cool in order to prevent
possible damage to the vacuum cleaner_
Thermal Protector - Agitator Motor
This vacuum cleaner has a thermal
protector which automatically trips to
protect the agitator motor° The thermal
protector turns the motor off
automatically, This allows the motor to
cool in order to prevent possible damage
to the vacuum cleaner_
Toreset thermal protector:Turnthe
vacuum cleaner off and unplug the power
cord from the outlet to allow the vacuum
cleaner to cool and the thermal protector
to reset°
_i_ CAUTION ......................
Always return the vaccum cleaner to the
upright position before using the hose
and attachments. Failure to do so may
result in overheating of the agitator
motor and can cause the thermal
protector to trip. .............
Check for and remove clogs, and
replace bag if necessary. See CLOG
REMOVAL section. Also check and
replace any clogged filters_ Walt
approximately 40-50 minutes before
restarting vacuum cleaner.
14