Filter
Top Products
I
PRIMARY FILTER CLEANING
It is recommended to clean filter with
cold water at least every three (3)
months.
Check the primary filter frequently and
clean when dtrty_
1oRemove the
rear cover by
Rear pressing the tabs
cover- r_l IJJ_wJI II located on each
side_
2. Lift cover off
of vacuum
cleaner°
3o Remove the
primary filter from
the rear cover°
4. Wash with cold
water only, DO
NOT use detergent
or soap° Repeat
10 times or until
water runs clear_
Primary
5_ Once the filter is washed clean,
squeeze by hand and allow to air dry.
64 Allow filter to dry 24 hours before
putting back into vacuum cleaner,
NOTE: When the cleaning of the filler no
longer restores vacuum cleaner suction to
full power, replace the filter.
DO NOT operate wilhout primary filler
installed,
DO NOT wash in the dishwasher.
DO NOT install damp.
4_ Reinstall the foam filter Into the rear
cover,_
5. Reinstall the rear cover by snapping
into place on the back of the vacuum
cleaner_ A noticeable "click" should be
heard.
2O