Filter
Top Products
10
! q _ti_•
__i__!,:;,:_•
PICKING UP BOBBIN THREAD
Raise presser foot lever
Hold needle thread loosely in left hand and rotate hand
wheel toward you one complete turn
Bring bobbin thread up by pulting upper thread {See illus-
tration)
Place threads back under presser foot
ADJUSTING THE PRESSURE OF THE
PRESSER FOOT
Push down outer ring of presser foot knob (See illustration),
This will release pressure of presser foot, To increase
pressure, push down inner pin until suitable pressure is
obtained,
For ordinary sewing, the inner pin should be about half way
down, When sewing multiple thickness or heavy material,
reduce the pressure, increase it when sewing sheer fabrics.
Insufficient pressure may cause skipped stitches or difficulty
in guiding the fabric° If feed dog or presser foot marks
appear on the fabric, reduce the pressure.