Filter
Top Products
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit,
Failure to do so could result in
electrical shock or personal injury
from cleaner suddenly starting,
, , I I II I =
Disconnect the power cord from the elec-
trical outlet.
Press the handle release pedal to let the
upper portion of the cleaner lay back
against the floor°
Remove
Two Locking Tabs the base
Screws plate as
outlined in
the BELT
CHANG-
ING AND
AGITATOR
CLEANING
section.
E• CAUTION
Do not use a bulb rated over 15W
(130V). During extended use, heat
from the bulb could overheat sur-
rounding plastic parts.
Grasp the
bulb socket
assembly
and while
gently rock-
ing it from
side to side,
pull it up out
of the noz-
zle housing
_J
/
Bulb Socket Assembfy
Remove the light
To Release bulb by pushing
__ the bulb in while
turning counter-
_ clockwise to
release from the
slot,Then pull the
light bulb straight
out,
To replace the light
bulb, carefully insert
and turn clockwise
to securely fit into
slot.
NOTE: See PARTS
AND FEATURES
for bulb number.
, 'CAuTION ....
Do not plug in or turn on until the
vacuum is completely reassem-
bled,
Replace the base plate as outlined in the
BELT CHANGING AND AGITATOR
CLEANING section.
Screws
Two Locking Tabs
2O