Filter
Top Products
WARNING
Always unplug power cord from
electrical outlet before performing
any service on vacuum.
Press the
release button
located on the
top of the bag
COVER
Release
Button
Bag
Cover
Cover\ \ _ tl
bag collar and
pull gently, care-
fully removing the
Throw away the '/
oust-_,.,_ _ _.\
used dust bag_ __t
Do not reuse,
Pull the bag
cover forward.
Remove and
lay aside
CAUTION
NEVER REUSE A DUST BAG. Very
fine materials, such as carpet
freshener, face powder, fine dust,
plaster, soot, etc. can clog the bag
and cause it to burst before it is
full. Change bag more often when
vacuuming these materials.
13
Dirt Tube/
Bag Holder
-- Bag
Cavity
Motor
Safety
- Filter
TO REPLACE BAG
Fold the safe-
ty seal tab on
the new dust
bag away
from the
opening that
fits on the
dust tube.
Dust Bag
Check the dust
tube and the
motor safety
filter.
If either is
blocked, check
the TROUBLE-
SHOOTING
charL •
NOTE: See PARTS AND FEATURES for
Dust Bag number.
Unfold the new dust bag,
Insert the dust bag
onto the dirt tube
completely by
holding the bag
collar° Snap the
dust bag collar
into position.
Be sure bottom of dust bag is completely
within dust bag cavity prior to replacing
the bag cover_
Position
the bag
cover so
its posi-
tioning tab
fits into
the body
positioning
slot,
Cover I
Body
Close the bag
cover.
You wilt hear a
distinct snap
when cover is
securely closed°