Filter
Top Products
Pleasepayspecialattention to these hazard alert boxes, and follow any
_ instructions given. WARNING statements alert you to such hazards as fire,
electric shock, burns and personal injury. CAUTION statements alert you to
such hazards as personal injury and/or property damage.
_WARNING
Electrical Shock Hazard
DO NOT plug into the electrical
supply until the assembly iscomplete.
Failure to do so could result in
electrical shock or injury.
Before assembling the vacuum cleaner,
check the PACKING LIST on page 2. Use
this list to verify that you have received
°It the components of your new Kenmore
vacuum cleaner.
HANDLE ASSEMBLY
CAUTION
Do not overtighten.
Overtlghtening could strip the screw
holes.
Do not operate the vacuum cleaner
without the screw in place.
1. Remove the handle
screw from the rear
of handle unit.
2. Remove and
discard cardboard.
3. Assemble the
handle as shown in
the illustration.
4. Using a Philips screwdriver, tighten
handle screw. NOTE: Do not overtighten.
Screw__
.o e \ll
Caddy/
Refainer
Pet
_-Handi
Mafe TM
--Crevice
Tool
i
5. Snap Pet Handi Mate TM into
Caddy/Retainer.
6. Snap Dusting Brush and Crevice Tool in
areas as shown.
-6-