Filter
Top Products
1. Remove Power-Mate ® cover as shown in
BELT CHANGING AND AGITATOR CLEAN-
ING section.
_Push In 3. Push in and turn
And Turn bulb clockwise, to
replace. Bulb must
not be higher than
15 Watts(130 Volts).
Push In
And Turn
i_.._ 2. Push in and turn
bulb counterclock-
wise, then pull out
to remove.
4. Reinstall Power-Mate ® cover as shown in
BELT CHANGING AND AGITATOR CLEAN-
ING section.
NOTE: See PARTS AND FEATURE[S for
bulb number.
E',f WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical shock
or personal injury from cleaner sud-
denly starting.
TO CHECKBRUSHES
Whenbrushes
_ re worn to the
level of the base
support bars,
replace the
agitator.
Base Support Bars
TO REPLACE AGITATOR
1. Remove Power-Mate ®cover, belt and
agitator assembly. See "To Remove Belt" in
BELT CHANGING AND AGITATOR
CLEANING.
2. Replace agitator assembly
3. Reassemble belt, agitator assembly,
Power-Mate*cover, light bulb and light cover.
See 'q-o replace belt" in BELT CHANGING
AND AGITATOR CLEANING.
18