Kenmore 116.23637C Vacuum Cleaner User Manual


 
Always follow all safety precautions when
cleaning and servicing the Power-Mate _,
! WARNING
ElectricalShock Or Personal Injury
Hazard
Disconnectalectrical supply before
servicingor cleaning the unit. Failure
to do so could result in electrical shock
or personal injury from cleaner sud-
denly starting.
Disconnect cleaner from electrical outlet.
Check and remove hair, string and lint build-
up frequently in the Power-Mate ® brush and
brush support areas. If build-up becomes
excessive, disconnect Power-Mate" from
wand and follow the steps below.
TO REMOVE BELT
1. Turn Power-
Mate ® upside
down.
2. Unscrew the
two (2) Power-
Mate ® cover
screws.
3. Turn Power-
Mate ® right side
up. Press handle
release pedal and
lower the swivel.
Lift rear latches up.
4, To remove cover,
grasp the sides and pull
out.
5. Depress tabs
on rear of
agitator cover
and rotate
forward to
release from
the Power-
Mate ® base.
Agitator
Cover
End Cap
Tabs
6. Lift agitator
assembly out
and remove
worn belt.
7. Check and clean end cap areas.
16