Filter
Top Products
TO CLEAN AGITATOR
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacu-
um, the agitator must be cleaned every time
the belt is chart eqe#_d.
The agitator must also be cleaned accord-
ing to the following schedule:
Vacuum Use
HEAVY -
(used daily)
MODERATE -
(used 2-3 times/week)
LIGHT -
(used 1time/week)
Clean Agitator
every week
every month
every 2 months
Agitator Assembly
Brush Unit
End Cap i
L_ Belt Pulley
TO REPLACE BELT
1. Install new
belt over motor
drive, then
over brush
sprocket.
NOTE: See
PARTS AND
FEATURES for
belt number.
End Cap
Agitator
m
assembly back
into Power-Mate e
3. Reinstall
agitator
cover by lin-
ing up the
front tabs
and slots
and rotating
downward
until the
latches snap
Cover
Tabs
Agitator Cover
into place.
Base
4. Line up
front of
cover and
base. Rest
cover on
front edge
of base as
shown.
5. Rotate cover
back. Press
cover firmly
until side and
rear tabs snap
into place. Turn
Power-Mate ®
upside down
and replace two
(2) cover
screws.
17