!
WARNING
Personal Injury and Product Damage
Hazard
DO NOT plug in if switch is in ON
position. Personal injury or
damage could resulL
The cord moves rapidly when
rewinding. Press cord rewind
with foot only. Keep children away
and provide a clear path when
rewinding the cord to prevent
personal injury.
• DO NOT use outlets above
counters. Damage from cord to
items in surrounding area
could occur.
Button
1. Pull cord out of canisterto desired length.
The cord will not rewinduntilthe cord
rewind buttonis pushed.
NOTE: To reduce the risk of electric shock,
this vacuum cleaner has a polarized plug;
one blade iswider than the other.This plug
will fitin a polarizedoutlet only one way. If
the plug does notfitfullyin the outlet,
reversethe plug. If it stilldoes not fit, con-
tact a qualified electrician to installthe prop-
er outlet. Do notchange the plug in any way
.2. Plug the polarized power cord into a 120
Volt outlet located near the floor.
To rewind: Unplug power cord. Hold the
plug while rewinding to prevent damage to
the cord plug or injury from the moving
cord. Push cord rewind button down to
retract cord.
Handle
Release
Pile HeightPedsJ
(Some Models)
Pile Height
Indicator
3. Lower wand from uprightposition by
pressing the handle release pedal.
CAUTION
DO NOT leave the Power-Mate_
running in one spot in the upright
position for any length of time.
Damage to carpet may occur.
4. Select a pile height settingby pressing
the small pedal on the rear of the Power-
Mate". The pile height setting shows on the
indicator. See SUGGESTED PILE HEIGHT
SETTINGS.
Attention: Refer to your carpet manufac-
turers cleaning recommendations. Some
more delicate carpets may require that they
be vacuumed with the Power-Mate" agitator
turned off, to prevent carpet damage.
5. Select an ElectronicTouchControl posi-
tion onthe handle dependingon the type of
vacuumingyouwill be doing.
8