Filter
Top Products
r. WARNING
Electrical Shock Hazard
Do not operate the cleaner without
the motor safety filter. Be sure the fil-
ter is properly installed to prevent
motor failure and/or electrical shock.
Always unplug power cord from elec-
trical outlet before performing any
service on vacuum,
SECONDARY FILTER
FOAM
Check secondaryfilterfrequently and clean
when dirty.
Remove the dust bin as outlined in the
DUST BIN CLEANING section.
Remove secondary filter from vacuum cleaner.
-Secondary
Filter
Wash the secondary filterin warm soapy
water, rinse and dry thoroughlyby squeez-
ing the filterin your hand and lettingit air
dry.
DO NOT wash in the dishwasher.
DO NOT install damp.
Replace dry secondaryfilter.Ensure filter is
properlyinstalledover filteropening.
Replace the dust bin as outined in the
DUST BIN CLEANING section.
EXHAUST FILTER
HEPA
The exhaust filter must be replaced when
dirty. It should be replaced regularly
depending on use conditions,
The filter CANNOT be washed as it will
lose its dust trapping ability.
NOTE: See PARTS AND FEATURES
for the exhaust filter number.
Press release tab
on filter cartridge
and pull outof
canister.(Cover
notshown for
clarity).
Remove filter
from cartridge by
pushing out
through the slot in
the cartidge.
TO REPLACE FILTER
Slide new filter into
cartridge so that
the foam side will
face towards the
canister, as shown.
The filter
should be
placed into the
cartridge so
that the "A"
symbolsalign.
Replace the
exhaust filter
catddge by plac-
ing tabs in slots
and pushingdown
untilcartridge
snaps intoplace.
16